Flowvess PWP Expansion Vessel
The flowvess PWP expansion vessels are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting.
A wide range of sizes from 8 to 150 litres. The flowvess PWP series is constructed of a polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded O-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection.
The diaphragm and liner are both reinforced in specific wear area for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.
On the exterior the almond coloured two-part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection. All tanks are inspected frequently on the production line to ensure the structural integrity of every tank.
- Maximum Working Pressure: 10 bar Rated
- Capacity: 8 – 150 litre
- Maximum operating temperature: 90˚C
- Single diaphragm design
- Each vessel is factory tested.
- Nitrogen gas filling for longer retention of pre-charge.
